STANDARD ACCESSORIES
Well Laid-out pressure spikes
The pressure spikes are in an overlapped layout with a minimum of gaps that hold the workpiece firmly and evening ensuring shake-free feeding, even for short workpiece.
Rear control device
Instant response and emergency stop to any abnormality, or just to stop/start the feeding, and provide the operator at the rear to perform on-site height adjustment of machine.
Gear reducer
Reduce wear caused by temperature rise and improve efficiency of power transmission.
Feeding inverter
Digital display and quick operation to reduce wear on mechanical gearbox.
Quick thickness setting
Fast and convenient thickness setting can be achieved by simply placing a wood sample of identical thickness under the micro switch.(standard equipment on models 610A and 635ARD only. Optional for other models.)
Centralized hand lubricator
A centralized hand lubricator is provided for conveniently lubricating the elevation slideways. (standard equipment on models 610A and 635ARD only. Optional for other models.)
Model | GT-610A |
Maximum Width Of Cut | 610mm ( 24" ) |
Maximum Thickness Of Cut | 200mm ( 8" ) |
Minmum Thickness Of Cut | 8mm |
Minmum Lenght Of Cut | 310mm |
Knife Nos. On Top Cutterhead | 96pcs |
Knife Nos. On Bottom Cutterhead | 4pcs |
Knife Sizes | 610x3x30mm(24"x1/4"x1-1/2") |
CutterHead Speed | 4000RPM |
Variable Feed Speed-inverter | 8-24m/min |
Dust Hood Outlet Diameter | 6" x 2 |
Table Surface Area | 27"x103" |
Top Cutterhead Drive Motor | 20(25HP) |
Buttom Cutterhead Drive Motor | 15(20HP) |
Feed Drive Motor | 3HP |
Upper Mechanism Elevation Motor | 1/2HP |
Machine Dimensions(LxWxH) | 2700x1145x1720mm |
Net Weight | 3000kg |
Packing Dimensions(LxWxH) | 2780x1240x1940mm |
Gross Weight | 3500kg |