STANDARD ACCESSORIES
Well Laid-out pressure spikes
The pressure spikes are in an overlapped layout with a minimum of gaps that hold the workpiece firmly and evening ensuring shake-free feeding, even for short workpiece.
Rear control device
Instant response and emergency stop to any abnormality, or just to stop/start the feeding, and provide the operator at the rear to perform on-site height adjustment of machine.
Gear reducer
Reduce wear caused by temperature rise and improve efficiency of power transmission.
Feeding inverter
Digital display and quick operation to reduce wear on mechanical gearbox.
Fast knife replacement
The bottom cutterhead can be conveniently pulled out and is combined with an air wrench for greatly saving knife change time.
Automatic lubricator
The automatic lubricator delivers frequent lubrication oil to the caterpillar chain.
Model | GT-400B |
Maximum Width Of Cut | 405mm ( 16" ) |
Maximum Thickness Of Cut | 200mm ( 8" ) |
Minmum Thickness Of Cut | 8mm |
Minmum Lenght Of Cut | 250mm |
Knife Nos. On Top Cutterhead | 96pcs |
Knife Nos. On Bottom Cutterhead | 4pcs |
Knife Sizes | 405x3x30mm(16"x1/8"x1-1/8") |
CutterHead Speed | 4000RPM |
Variable Feed Speed-inverter | 8-24m/min |
Dust Hood Outlet Diameter | 5" x 2 |
Table Surface Area | 19"x86" |
Top Cutterhead Drive Motor | 7.5(10HP) |
Buttom Cutterhead Drive Motor | 7.5 HP |
Feed Drive Motor | 2HP |
Upper Mechanism Elevation Motor | 1/2HP |
Machine Dimensions(LxWxH) | 2200x900x1700mm |
Net Weight | 1900kg |
Packing Dimensions(LxWxH) | 2350x1060x1940mm |
Gross Weight | 2100kg |