Jun Shiau

Sheng Shing SP series

Sheng Shing SP series
  • 175 Hoa Lan Str., Ward 2, Phu Nhuan Dist. Hochiminh City. Vn
  • (+84) 8 3517 3407
  • (+84) 8 3517 3407
  • Vetta@vetta.com.vn
  • 42/17 DT743, Binh Phuoc B, Binh Chuan, Thuan An,Binh Duong
  • (84.650) 3712 771
  • (84.650) 3712 768
  • binhduong@vetta.com.vn
Advantage

Sheng Shing SP series

application for lacquered, sealer, UV-coating

other type:

fsp

sp_02 Two heads: 1st. and 2nd. are roller type is ideal for lacquered, sealer, UV-coating sanding.
Working width from 610mm to 1300mm. Single and Double heads are available.
new_sd_22

DIGITAL READOUT CONTROLLED

The conveyor raising and digital controlled. Specially designed numerical keys are accurate and easy to operate. Safety devices are provided at the infeed, the upper and lower limit end, providing a safeguard for the operator and machine.

ADVANCED HYDRAULIC DRIVE CONVEYOR BELT

Micro switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine.

BELT CLEANING DEVICE

To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust.This greatly increases the belt's life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding intervals. (Optional)

new_sd_25

SANDING BELT OSCILLATION CONTROL

The sanding belt oscillation is controlled by a dust proof air eye. The sanding belt can oscillate in the event of power failure. The oscillation range of the sanding belt is 15 - 20mm. The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt.

new_sd_27

HYDRAULIC DRIVE CONVEYOR BELT

The super lightweight driving system is mounted at the end of the conveyor table, ensuring maximum feed accuracy and stability. A powerful hydraulic driving system automatically adjusts to the correct pressure regardless of the panel weight or plate holding pressure. The system eliminates belt slipping or chattering while running. (Optional)

new_sd_29

BRUSH ROLLER

Clear away the dust on the working piece in the final step. Polishing roller is upon request. (Optional)

sp_04 The pressure plate is welded from steel plate, hard chrome plated for hardness up to RC 70°, and precise machining for a superior surface finish. Maximum stability and smoothness of panel feeding is achieved through the pressure plate incorporated with rubber covered pressure roller.
sp_09

HIGH QUALITY CONVEYOR BELT

The machine employs an Italian imported high quality conveyor belt, ensuring extremely smooth feeding, minimum wear, and break free performance.

VACUUM SUCTION

After being laminated with the veneer, the particle board usually suffers from bending. This is solved by the very close pressure plates which in conjunction with a vacuum suction device, will straighten the panels. This will not only prevent the veneer or lacquer from being over-sanded or the panel from slipping, but also increases the dust extraction effect.
(Optional)

sp_10_1

INVERTER

The machine is built with a high performance frequency inverter which can be adjusted for any desired speed to accommodate a variety of paint and panel characteristics.
(Optional)

 

Technical data
83" Model
83" Model/ Rubber Roller Dia 300mm SP-60 SP-90 SP-110 SP-130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 5 HP 5 HP 7.5 HP 10 HP
Hydraulic pump motor 3 HP 3 HP 5 HP 5 HP
Vacuum pump motor 2 HP 2 HP 2 HP 2 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Brush Roller Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2108 mm 915 x 2108 mm 1100 x 2108 mm 1346 x 2108 mm
Dust exhausted 5700 M³/hr 5700 M³/hr 8000 M³/hr 8000 M³/hr
Compressed air consumed 0.2 M³/min 0.2 M³/min 0.2 M³/min 0.2 M³/min
Packing size (L) 2250 mm
(W) 1530 mm
(H) 2130 mm
(L) 2250 mm
(W) 1850 mm
(H) 2130 mm
(L) 2250 mm
(W) 2030 mm
(H) 2130 mm
(L) 2300 mm
(W) 2250 mm
(H) 2130 mm
Net weight 1700 kgs 2000 kgs 2500 kgs 3000 kgs
Gross weight 1880 kgs 2200 kgs 2800 kgs 3400 kgs

 

83" Model
83" Model/ Rubber Roller Dia 300mm SP-260 SP-290 SP-2110 SP-2130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 7.5 HP, 5 HP 10 HP, 7.5 HP 15 HP, 10 HP 20 HP, 15 HP
Hydraulic pump motor 5 HP 5 HP 7.5 HP 7.5 HP
Vacuum pump motor 2 HP 2 HP 3 HP 3 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1 HP 1 HP
Brush Roller Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2108 mm 915 x 2108 mm 1100 x 2108 mm 1346 x 2108 mm
Dust exhausted 6800 M³/hr 6800 M³/hr 9100 M³/hr 9100 M³/hr
Compressed air consumed 0.35 M³/min 0.35 M³/min 0.35 M³/min 0.35 M³/min
Packing size (L) 2250 mm
(W) 1530 mm
(H) 2130 mm
(L) 2500 mm
(W) 1850 mm
(H) 2130 mm
(L) 2500 mm
(W) 2030 mm
(H) 2130 mm
(L) 2500 mm
(W) 2300 mm
(H) 2130 mm
Net weight 2300 kgs 3000 kgs 3500 kgs 4000 kgs
Gross weight 2500 kgs 3250 kgs 3800 kgs 4350 kgs

 

 

103" Model
103" Model/ Rubber Roller Dia 420mm SP-60 SP-90 SP-110 SP-130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 7.5 HP 10 HP 10 HP 15 HP
Hydraulic pump motor 5 HP 5 HP 5 HP 5 HP
Vacuum pump motor 2 HP 2 HP 2 HP 2 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Brush Roller Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2616 mm 915 x 2616 mm 1100 x 2616 mm 1346 x 2616 mm
Dust exhausted 5700 M³/hr 5700 M³/hr 8000 M³/hr 8000 M³/hr
Compressed air consumed 0.2 M³/min 0.2 M³/min 0.2 M³/min 0.2 M³/min
Packing size (L) 2350 mm
(W) 1600 mm
(H) 2330 mm
(L) 2350 mm
(W) 1900 mm
(H) 2330 mm
(L) 2350 mm
(W) 2100 mm
(H) 2330 mm
(L) 2350 mm
(W) 2300 mm
(H) 2330 mm
Net weight 2300 kgs 2400 kgs 3800 kgs 4200 kgs
Gross weight 2500 kgs 2650 kgs 4100 kgs 4600 kgs

 

103" Model
103" Model/ Rubber Roller Dia 420mm SP-260 SP-290 SP-2110 SP-2130
Max. working width 610 mm 914 mm 1100 mm 1300 mm
Max. working height 120 mm 120 mm 120 mm 120 mm
Main spindle motor 7.5 HP, 5 HP 10 HP, 7.5 HP 15 HP, 10 HP 20 HP, 15 HP
Hydraulic pump motor 5 HP 5 HP 7.5 HP 7.5 HP
Vacuum pump motor 2 HP 2 HP 3 HP 3 HP
Table lifting & lowering motor (digital controlled) 1/2 HP 1/2 HP 1 HP 1 HP
Brush Roller Motor 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Feed speed 0~18 M/min 0~18 M/min 0~18 M/min 0~18 M/min
Size of sanding belt 610 x 2616 mm 915 x 2616 mm 1100 x 2616 mm 1346 x 2616 mm
Dust exhausted 6800 M³/hr 6800 M³/hr 9100 M³/hr 9100 M³/hr
Compressed air consumed 0.35 M³/min 0.35 M³/min 0.35 M³/min 0.35 M³/min
Packing size (L) 2650 mm
(W)1600 mm
(H) 2330 mm
(L) 2550 mm
(W) 1900 mm
(H) 2330 mm
(L) 2550 mm
(W) 2100 mm
(H) 2330 mm
(L) 2550 mm
(W) 2300 mm
(H) 2330 mm
Net weight 3500 kgs 4300 kgs 4900 kgs 5800 kgs
Gross weight 3800 kgs 4650 kgs 5300 kgs 6200 kgs
Video

 

Customer reviews
Vetta Head Office
  • 175 Hoa Lan Str., Ward 2, Phu Nhuan Dist. Hochiminh City. Vn
  • (+84) 8 3517 3407
  • (+84) 8 3517 3407
  • Vetta@vetta.com.vn
  • View map
Vetta showroom- Binh Duong branch
  • 42/17 DT743, Binh Phuoc B, Binh Chuan, Thuan An,Binh Duong
  • (84.650) 3712 771
  • (84.650) 3712 768
  • binhduong@vetta.com.vn
  • View map
Liên hệ VETTA
Tổng đài bán hàng
HOTLINE:
aaa
Liên hệ mua máy móc
Xuân Khải:
aaa
Hoàng Anh:
aaa
Kim Tiền:
aaa
Liên hệ mua lưỡi cưa
Ms Phương:
aaa
phụ kiện krea shop , krea shop , củ sạc nhanh innostyle tv box evpad , tv box ubox , tv box hke 360 , củ sạc innostyle chất lượng thế nào